tda7052 audio amplifier circuit

Pin Descriptions: Pin 1 (VP): Supply Voltage Positive (Power Supply Pin) Connect the positive terminal of the power supply (3V to 6V) here. Pin 2 (IN+): Non-Inverting Input This is the input pin for the audio signal. The signal is applied here for amplification. Pin 3 (GND1): Ground This is the ground pin for the input section of the IC. It connects to the system ground. Pin 4 (VC): Volume Control (optional) This pin can be used for volume control. In some designs, it is connected to an external potentiometer or other volume adjustment circuitry. Pin 5 (OUT+): Positive Output This is one of the audio output pins. It connects to the positive terminal of the speaker. Pin 6 (GND2): Ground This is the ground pin for the output section. It should be connected to the system ground. Pin 7 (NC): No Connection This pin is not connected internally. It can be left unconnected in the circuit. Pin 8 (OUT-): Negative Output This is the second output pin, connecting to the negative terminal of the speaker. How the Pins Relate to the Circuit:

TDA7052 1W Mono Audio Amplifier Circuit

rg electrics
admin

RG Electrics

Home

About Us

Contact Us

Advertise

Top Categories

Audio Amplifier

Top Electronics Projects

LED Light Projects

Quick Links

Privacy Policy

Disclaimer

Terms and Conditions

Follow on Us

Design and Created by RG Electrics © 2025 | All Rights Reserved

RG Electrics © 2025 | All Rights Reserved